|
Degradation of Oil, Petroleum and Hydrocarbon
Waste - BioTreat HD50 is an innovative, microbial
product that has been specifically formulated to treat
and degrade oil
field, petroleum, refinery and other industrial wastes.
BioTreat HD50 has been developed as an effective oil
and hydrocarbon waste degrader and can be used in waste
treatment systems, oil sludge farming operations and
spill clean-up situations.
BioTreat HD50 is designed to deal with wastes resulting
from pumping, distilling, fractionation, alkylation
and polymerisation processes where wastes are usually
of large volume containing high suspended and dissolved
solids, surfactants, oil, wax, sulphides, mercaptans,
phenolic compounds, cresylates, and other hydrocarbon
based compounds.
BioTreat HD50 is a formulation of naturally occurring
microbes and biochemical accelerators. The unique combination
of cultures in BioTreat HD50 rapidly degrades various
hydrocarbons and organic chemicals which may be toxic,
inhibitory or bio-resistant to natural microbial populations.
Destabilisation of biological systems such as changes
in incoming waste concentrations, composition of waste,
pH, temperature and nutrient level can be mitigated
with the regular addition of BioTreat HD50 to the wastewater
and waste disposal systems. The microbial protoplasm
produced is a biodegradable source of food for higher
life forms.
BioTreat HD50 by virtue of its unique formulation,
is also well suited to augment the performance of oily
sludge farming operations and hazardous spill clean
up operations. BioTreat HD50 should be applied in conjunction
with an application augmentation program provided by
a BioTreat consultant.
BioTreat HD50 comprises a proprietary blend of naturally
occurring microbes and biochemical accelerators used
to degrade various hydrocarbon and organic chemical,
which may be toxic.
Advantages
- Highly effective petroleum
degrader.
- Adds nutrients to soil as
it breaks down the oil.
Suggested Application
Rate
- Disperse one part BioTreat HD50 in eight to ten
parts warm water (about 1lb. per gall.). The water
should be about 80-100oF(25-40oC). Allow to stand
for one to two hours with occasional stirring. Apply
liberally on the spill area.
- Do not add BioTreat HD50 to the treatment system
at a location where toxic or otherwise adverse pH,
dissolved oxygen or temperature conditions may exist
at peak levels.
Storage and Disposal
- Shelf life: Dry- 2 years.
- Store in original container.
- Store sealed in a dry place at room temperature
not exceeding 100 degrees F.
- DO NOT ALLOW PRODUCT TO BECOME WET OR MOIST PRIOR
TO USE.
- DO NOT FREEZE.
Additional Information
For additional information please contact BioTreat
info@biotreat.co.uk .
|
